Synthes 01.013.303 Retrograde/Antegrade Femoral Nail Expert Instrument Set

Synthes 01.013.303 Retrograde/Antegrade Femoral Nail Expert Instrument Set

• Case Dimensions: 20" X 10" X 6"
  
• Notes: Set is fully loaded and in almost new condition
• INCLUDES
  03.010.020 Radiographic Ruler, for Titanium Cannulated
  Femoral Nails
  03.010.023 Radiographic Canal Width Estimator, for
  IM Nails
  03.010.024 Holding Device, for Guide Wires and
  Reaming Rods
  03.010.030 13.0 mm Protection Sleeve
  03.010.031 13.0 mm/3.2 mm Wire Guide, with trocar tip
  03.010.034◊ 13.0 mm Flexible Cannulated Drill Bit, large
  quick coupling, 465 mm
  03.010.041 14.0 mm Cannulated Awl
  03.010.044 Cannulated Connecting Screw, for Standard
  Insertion Handle, 2 ea.
  03.010.045 Standard Insertion Handle
  03.010.047 Driving Cap with Handle Adapter
  03.010.049 Aiming Arm, for Antegrade Standard Locking
  03.010.050 Aiming Arm, for Retrograde Standard
  Locking
  03.010.051 Aiming Arm, for Retrograde Spiral Blade
  Locking
  03.010.056 Slide/Fixed Hammer, 700 grams
  03.010.061◊ 4.2 mm Three-Fluted Drill Bit, quick coupling,
  330 mm, 100 mm calibration, 2 ea.
  03.010.062◊ 5.0 mm Three-Fluted Drill Bit, quick coupling,
  330 mm, 100 mm calibration, 2 ea.
  03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm
  03.010.065 8.0 mm/ 4.2 mm Drill Sleeve, 200 mm
  03.010.066 8.0 mm/ 5.0 mm Drill Sleeve, 200 mm
  03.010.070 4.2 mm Trocar, 210 mm
  03.010.071 5.0 mm Trocar, 210 mm
  03.010.072 Depth Gauge, for Locking Screws to 100 mm,
  for IM Nails
  03.010.081 15.0 mm/13.0 mm Protection Sleeve,
  for Spiral Blade Aiming Arm
  03.010.082 13.0 mm/3.2 mm Wire Guide, for
  Spiral Blade Aiming Arm
  03.010.083 Spiral Blade Measuring Device, for
  Retrograde Femoral Nails–EX
  03.010.084 Spiral Blade Inserter, for Retrograde
  Femoral Nails–EX
  03.010.092 Ball Hex Screwdriver, 8 mm
  03.010.093 Reaming Rod Push Rod, with Ball Handle
  03.010.104◊ 4.2 mm Three-Fluted Drill bit, quick coupling,
  needle point, 145 mm, 2 ea.
  03.010.105◊ 5.0 mm Three-Fluted Drill bit, quick coupling,
  needle point, 145 mm, 2 ea.
  03.010.106 Direct Measuring Device, for Locking Screws
  to 100 mm, for IM Nails
  03.010.107 StarDrive Screwdriver, T25, self-retaining
  03.010.110 Cannulated StarDrive Screwdriver, T40,
  self-retaining
  03.010.112 Holding Sleeve, with Locking Device
  03.010.115 3.2 mm Guide Wire, 290 mm, 3 ea.
  321.17 4.5 mm Pin Wrench, 120 mm, 2 ea.
  321.20 Ratchet Wrench, 11 mm width across flats
  351.05 Tissue Protector
  351.27◊ 13.0 mm Cannulated Drill Bit, 300 mm
  357.127 13.0 mm Protection Sleeve
  357.128 13.0 mm/3.2 mm Trocar
  357.133 Extraction Screw, for Titanium Femoral and
  Tibial Nails
  357.22 Hammer Guide, for Slide Hammer
  357.34 Connecting Screw, for Inserter for Titanium
  Spiral Blades
  357.36 Extraction Screw
  357.398 Cannulated Shaft with 8 mm hex, 125 mm
• *Includes all instruments shown in photos

Mechanical Condition: Good
Cosmetic Condition: Good

Warranty: 6 Months (Covers OEM Defects)

“The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.”