Product Description
Synthes 105.445 LC-DCP Self Tapping Small Fragment Instrument and Implant Set
INSTRUMENTS INCLUDED
292.12 1.25 mm Kirschner Wire, 150 mm, trocar point QTY 10+
292.16 1.6 mm Kirschner Wire, 150 mm, trocar point QTY 10+
292.20 2.0 mm Kirschner Wire, 150 mm, trocar point QTY 10+
310.35 3.5 mm Drill Bit, quick coupling, 110 mm, QTY 1
310.89 Countersink, for use with Handle (311.43) or T-Handle (311.44)
311.32 Tap for 3.5 mm Cortex Screws, gold, 110 mm, QTY 1
311.34 Tap for 4.0 mm Cancellous Bone Screws, 110 mm, QTY 2
311.44 T-Handle, with quick coupling
312.20 2.0 mm Parallel Drill Guide and Drill Sleeve
312.28 3.5 mm/2.5 mm Double Drill Sleeve
312.30 3.5 mm/2.5 mm Insert Drill Sleeve
314.02 Small Hexagonal Screwdriver with Holding Sleeve
314.03 Small Hexagonal Screwdriver Shaft
319.04 Depth Gauge, measures up to 50 mm
319.39 Sharp Hook
319.97 Screw Forceps
323.35 3.5 mm LC-DCP Drill Guide, neutral and load
323.36 3.5 mm Universal Drill Guide
329.04 Bending Iron, for 2.7 mm and 3.5 mm plates, 150 mm length, used with Bending Iron (329.05)
329.05 Bending Iron, for 2.7 mm and 3.5 mm plates, 150 mm length, used with Bending Iron (329.04)
329.87 Bending Template, 7 holes, 3.5 mm LC-DCP and DCP Plates, 87 mm
329.89 Bending Template, 9 holes, 3.5 mm LC-DCP and DCP Plates, 112 mm
391.82 Wire-Bending Pliers, 160 mm
392.00 Bending Iron, for 1.25 mm, 1.6 mm, 2.0 mm Kirschner Wires
399.90 Reduction Forceps with Heavy Serrated Jaw, 140 mm length QTY 2
*398.41 Reduction Forceps with Points, Broad, Ratchet, 132 mm
398.80 Self-Centering Bone Forceps, size 0, 190 mm length, extra small serrated jaw, 10 mm, speed lock
399.19 Hohmann Retractor, 8 mm width, small, short narrow tip, 160 mm length, QTY 2
399.36 Periosteal Elevator, 6 mm width, curved blade, round edge
399.49 Hohmann Retractor, for small fragments, 15 mm width, broad shank, 160 mm length, QTY 2
399.99 Reduction Forceps, with serrated jaw, 144 mm length, ratchet
IMPLANTS INCLUDED
204.216–204.238 3.5 mm Shaft Screws, 16 mm–38 mm (2 mm increments), QTY 2 each size (16mm QTY 1)
204.810–204.850 3.5 mm Cortex Screws, self-tapping, 10 mm–32 mm (2 mm increments), QTY 8 each size; 34, 36, 38, 40, 45 and 50 mm, QTY 6 each size
206.010–206.060 4.0 mm Cancellous Bone Screws, fully threaded, 10 mm–30 mm (2 mm increments), 35, 40, 45 and 50 mm, QTY 4+ each size; 55 mm and 60 mm, QTY 4 each size
207.010–207.050 4.0 mm Cancellous Bone Screws, partially threaded, 10 mm–30 mm (2 mm increments), 35, 40, 45 and 50 mm, QTY 4+ each size
219.98 Washer, 7.0 mm, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
223.56 3.5 mm LC-DCP Plate, 6 holes
223.57 3.5 mm LC-DCP Plate, 7 holes
223.58 3.5 mm LC-DCP Plate, 8 holes
223.59 3.5 mm LC-DCP Plate, 9 holes
223.60 3.5 mm LC-DCP Plate, 10 holes
241.13 3.5 mm T-Plate, 3 holes, 3-hole head, right angle
241.15 3.5 mm T-Plate, 5 holes, 3-hole head, right angle
241.23 3.5 mm T-Plate, 3 holes, 3-hole head, oblique angle
241.24 3.5 mm T-Plate, 4 holes, 3-hole head, oblique angle
241.25 3.5 mm T-Plate, 5 holes, 3-hole head, oblique angle
241.32 One-Third Tubular Plate with collar, 2 holes
241.33 One-Third Tubular Plate with collar, 3 holes
241.34 One-Third Tubular Plate with collar, 4 holes
241.35 One-Third Tubular Plate with collar, 5 holes
241.36 One-Third Tubular Plate with collar, 6 holes
241.37 One-Third Tubular Plate with collar, 7 holes
241.38 One-Third Tubular Plate with collar, 8 holes
241.40 One-Third Tubular Plate with collar, 10 holes
241.83 Cloverleaf Plate, thin blade, 3 holes
241.84 Cloverleaf Plate, thin blade, 4 holes
Mechanical Condition: Good
Cosmetic Condition: Good
Warranty: 6 Months (Covers OEM Defects)
“The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.”
