Synthes Components

Synthes 329.922 Bending Pin for 2.4mm LCP Plates

Synthes 329.922 Bending Pin for 2.4mm LCP Plates Dimensions: for 2.4mm Plates

Synthes 357.398 Cannulated Shaft With 8mm Hex (NEW)

Synthes 357.398 Cannulated Shaft With 8mm Hex (NEW) Length: 12.5 cm

Synthes 310.495 Cannulated Drill Bit, 7.3mm X 300mm

Synthes 310.495 Cannulated Drill Bit, 7.3mm X 300mm Dimensions: 7.3mm X 300mm

Synthes 314.119 Stardrive Screwdriver Shaft 165mm

Synthes 314.119 Stardrive Screwdriver Shaft 165mm Dimensions: 165mm Long

Synthes 03.010.109 T25 Stardrive Screwdriver Shaft 280mm

Synthes 03.010.109 T25 Stardrive Screwdriver Shaft 280mm Dimensions: 280mm Long

Synthes 03.025.083 Three Fluted Drill, 3.9mm/4.2mm

Synthes 03.025.083 Three Fluted Drill, 3.9mm/4.2mm

Synthes 324.14 Drill Bit 3mm X 14mm (New)

Synthes 324.14 Drill Bit 3mm X 14mm (New) Dimensions: 3mm X 14mm

Synthes 388.54 Pedicle Probe, 3.8mm

Synthes 388.54 Pedicle Probe, 3.8mm Dimensions: 9" Long

Synthes 347.90 Universal Orthopedic Pliers

Synthes 347.90 Universal Orthopedic Pliers Dimensions: 7.5" Long

Synthes 319.15 Measuring Device, 3.5mm/ 4.5mm Screws

Synthes 319.15 Measuring Device, 3.5mm/ 4.5mm Screws Dimensions: 8.25" Long

Synthes 03.037.020 Helical Blade/ Screw Measuring Device

Synthes 03.037.020 Helical Blade/ Screw Measuring Device Dimensions: 70mm - 130mm <

Synthes 03.010.471 Guide Wire Aiming Device Offset Block

Synthes 03.010.471 Guide Wire Aiming Device Offset Block Dimensions: 4.25" X 2"

Synthes 03.333.203 Screw Countersink 4.5/5.5mm

Synthes 03.333.203 Screw Countersink 4.5/5.5 Dimensions: 4" Long

Synthes 03.010.473 T25 Inter-Lock Screwdriver, Stardrive

Synthes 03.010.473 T25 Inter-Lock Screwdriver, Stardrive Dimensions: 9" Long

Synthes 03.037.027 Tap For Screw

Synthes 03.037.027 Tap For Screw Dimensions: 16" Long

Synthes 03.333.502 Direct Measuring Device

Synthes 03.333.502 Direct Measuring Device Dimensions: For use with 4.5/5.5/6.5/7.5mm Screws<

Synthes 282.238 Helix Blade 95mm

Synthes 282.238 Helix Blade 95mm Dimensions: 95mm

Synthes 03.333.403 Double Drill Guide, 3.0mm/ 1.6mm

Synthes 03.333.403 Double Drill Guide, 3.0mm/ 1.6mm Dimensions: 6.75" Long

Synthes 397.011 Implant Holder

Synthes 397.011 Implant Holder Length: 14"

Synthes 315.40 4mm Three-Fluted Drill Bit

Synthes 315.40 4mm Three-Fluted Drill Bit Length: 4mm X 195mm